MixMor
Machine Components Corporation
3131 Casitas Avenue, Los Angeles, CA 90039
Phone: 323.664.1941
Fax: 323.660.5677
Email: info@mixmorinc.com
Print Back
  • Motors: Air motors.
  • Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.
  • Impeller Speeds: Direct Drive 1150, 1750 or 3450 rpm.

MixMor heavy duty direct drive mixers use Air motors mounted on aluminum drive housings. The housing encloses a double sealed ball bearing, with a lower lip seal for additional protection, to provide outboard support for the quill shaft which is subject to stresses from the mixer shaft. Mixer mounts with a heavy duty brass clamp with handwheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum mixer shaft angle. The Model DA mixer is a direct drive, air motor.
Unit of Measure

Specifications

Horsepower Range

 N/A 1/3 to 4

Impeller Speed

 N/A 1150 rpm1750 rpm3450 rpm

Mountings

 N/A Clamps Cup Base

Motor Type

 N/A Air Motor

Options

 N/A All Stainless Steel Mixers Coated Shaft and Impellers Sanitary Finishes Shaft and Impellers in other Alloys Stainless Steel Motors USDA Accepted Models

Impeller Selection

N/A

  • FloMor™ High Efficiency Hydrofoils, Three, Four and Wide Blade Designs
  • Square and Hi-Pitch Propellers
  • Pitched Blade Turbines, Three and Four Blade Designs
  • ShearMor™ Disperser Disks, Hi-Flow and Hi-Shear
  • Folding and Custom Impellers