Online Catalog

  • D-11

    The Model D mixer is a direct drive, electric motor.

    • Motors: Standard, commercially available, NEMA C face motors in all enclosures and power requirements.
    • Variable Speed Drives: Available with Inverter, AC variable frequency or Accumix® SCR/DC drives in NEMA 1 or 4 enclosures.
    • Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.
    • Impeller Speeds: Direct Drive 1150, 1750 or 3450 rpm.

    MixMor heavy duty direct drive mixers use standard NEMA C face motors mounted on aluminum drive housings. The housing encloses a double sealed ball bearing, with a lower lip seal for additional protection, to provide outboard support for the quill shaft which is subject to stresses from the mixer shaft. Mixer mounts with a heavy duty brass clamp with handwheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum mixer shaft angle.

  • DA-11

    • Motors: Air motors.
    • Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.
    • Impeller Speeds: Direct Drive 1800 rpm.

    MixMor heavy duty direct drive mixers use Air motors mounted on aluminum drive housings. The housing encloses a double sealed ball bearing, with a lower lip seal for additional protection, to provide outboard support for the quill shaft which is subject to stresses from the mixer shaft. Mixer mounts with a heavy duty brass clamp with handwheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum mixer shaft angle. The Model DA mixer is a direct drive, air motor.

  • G-2

    • Motors: Standard, commercially available, NEMA C face motors in all enclosures and power requirements.
    • Variable Speed Drives: Available with Inverter, AC variable frequency or Accumix® SCR/DC drives in NEMA 1 or 4 enclosures.
    • Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.
    • Gear Reducer: Helical gears with high service factors and lifetime lubrication.
    • Impeller Speeds:Gear Drive 230, 290, 350 or 420 rpm

    MixMor heavy duty gear drive mixers use standard NEMA C face motors mounted on aluminum gear drive housings. Housings enclose helical gears with a double sealed ball bearing with upper and lower seals for or additional protection. Gears are grease lubricated for life. Mixer mounts with a heavy duty brass clamp with hand wheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum shaft angle. The Model G mixer is a gear drive, electric motor.

  • GA-11

    The Model GA mixer is a gear drive, air motor.

    • Motors: Air motors.
    • Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.
    • Gear Reducer: Helical gears with high service factors and lifetime lubrication.
    • Impeller Speeds: 75-420 rpm or 60-350 rpm

    MixMor heavy duty gear drive mixers use Air motors mounted on aluminum gear drive housings. Housings enclose helical gears with a double sealed ball bearing with upper and lower seals for or additional protection. Gears are grease lubricated for life. Mixer mounts with a heavy duty brass clamp with hand wheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum shaft angle.

  • G-2

    MixMor currently carries 26 USDA Accepted Portable Mixers for applications within the food, dairy, pharmaceutical and other industries that require sanitary features. Incorporated into the MixMor design is the highest quality of stainless steel and electroless nickel finishes ensuring that MixMor mixers comply with the most stringent USDA government requirements. MixMor mixers can be designed with any combination of the features listed and other features to meet your individual requirements.