MixMor
Machine Components Corporation
3131 Casitas Avenue, Los Angeles, CA 90039
Phone: 323.664.1941
Fax: 323.660.5677
Email: info@mixmor.com
Print Back
The Model D mixer is a direct drive, electric motor.
  • Motors: Standard, commercially available, NEMA C face motors in all enclosures and power requirements.
  • Variable Speed Drives: Available with Inverter, AC variable frequency or Accumix® SCR/DC drives in NEMA 1 or 4 enclosures.
  • Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.
  • Impeller Speeds: Direct Drive 1150, 1750 or 3450 rpm.

MixMor heavy duty direct drive mixers use standard NEMA C face motors mounted on aluminum drive housings. The housing encloses a double sealed ball bearing, with a lower lip seal for additional protection, to provide outboard support for the quill shaft which is subject to stresses from the mixer shaft. Mixer mounts with a heavy duty brass clamp with handwheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum mixer shaft angle.
D-11
Unit of Measure
1 

Item #

Item Name

Horsepower Range

Impeller Speed

Mountings

Motor Type

Features & Benefits

D N/A Direct Drive Model D Portable Mixers N/A 1/4 to 5 N/A 1150 rpm1750 rpm3450 rpm N/A Clamps Cup Base N/A NEMA C N/A
  • Motors: Standard, commercially available, NEMA C face motors in all enclosures and power requirements, also available with air motors.
  • Variable Speed Drives: Available with Inverter, AC variable frequency or Accumix® SCR/DC drives in NEMA 1 or 4 enclosures.
  • Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.
  • Gear Reducer: Helical gears with high service factors and lifetime lubrication.
  • Impeller Speeds: Direct Drive 1150, 1750 or 3450 rpm.
Unit of Measure
1