Online Catalog
The Model D mixer is a direct drive, electric motor.
MixMor heavy duty direct drive mixers use standard NEMA C face motors mounted on aluminum drive housings. The housing encloses a double sealed ball bearing, with a lower lip seal for additional protection, to provide outboard support for the quill shaft which is subject to stresses from the mixer shaft. Mixer mounts with a heavy duty brass clamp with handwheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum mixer shaft angle.
- Motors: Standard, commercially available, NEMA C face motors in all enclosures and power requirements.
- Variable Speed Drives: Available with Inverter, AC variable frequency or Accumix® SCR/DC drives in NEMA 1 or 4 enclosures.
- Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.
- Impeller Speeds: Direct Drive 1150, 1750 or 3450 rpm.
MixMor heavy duty direct drive mixers use standard NEMA C face motors mounted on aluminum drive housings. The housing encloses a double sealed ball bearing, with a lower lip seal for additional protection, to provide outboard support for the quill shaft which is subject to stresses from the mixer shaft. Mixer mounts with a heavy duty brass clamp with handwheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum mixer shaft angle.
Unit of Measure
Specifications
Horsepower Range |
N/A 1/4 to 5 |
Impeller Speed |
N/A 1150 rpm1750 rpm3450 rpm |
Mountings |
N/A Clamps Cup Base |
Motor Type |
N/A NEMA C |
Options |
N/A All Stainless Steel Mixers Coated Shaft and Impellers Sanitary Finishes Shaft and Impellers in other Alloys Stainless Steel Motors USDA Accepted Models |
