MixMor - Direct Drive Model D Portable Mixers

The Model D mixer is a direct drive, electric motor.

Motors: Standard, commercially available, NEMA C face motors in all enclosures and power requirements.
Variable Speed Drives: Available with Inverter, AC variable frequency or Accumix® SCR/DC drives in NEMA 1 or 4 enclosures.
Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.
Impeller Speeds: Direct Drive 1150, 1750 or 3450 rpm.

MixMor heavy duty direct drive mixers use standard NEMA C face motors mounted on aluminum drive housings. The housing encloses a double sealed ball bearing, with a lower lip seal for additional protection, to provide outboard support for the quill shaft which is subject to stresses from the mixer shaft. Mixer mounts with a heavy duty brass clamp with handwheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum mixer shaft angle.

Unit of Measure

Items	D Direct Drive Model D Portable Mixers
Horsepower Range	N/A 1/4 to 5
Impeller Speed	N/A 1150 rpm1750 rpm3450 rpm
Mountings	N/A Clamps Cup Base
Motor Type	N/A NEMA C
Features & Benefits	N/A Motors: Standard, commercially available, NEMA C face motors in all enclosures and power requirements, also available with air motors. Variable Speed Drives: Available with Inverter, AC variable frequency or Accumix® SCR/DC drives in NEMA 1 or 4 enclosures. Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys. Gear Reducer: Helical gears with high service factors and lifetime lubrication. Impeller Speeds: Direct Drive 1150, 1750 or 3450 rpm.