MixMor
Machine Components Corporation
3131 Casitas Avenue, Los Angeles, CA 90039
Phone: 323.664.1941
Fax: 323.660.5677
Email: info@mixmor.com
Print Back
  • Motors: Standard, commercially available, NEMA C face motors in all enclosures and power requirements.
  • Variable Speed Drives: Available with Inverter, AC variable frequency or Accumix® SCR/DC drives in NEMA 1 or 4 enclosures.
  • Housings: Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.
  • Gear Reducer: Helical gears with high service factors and lifetime lubrication.
  • Impeller Speeds:Gear Drive 230, 290, 350 or 420 rpm

MixMor heavy duty gear drive mixers use standard NEMA C face motors mounted on aluminum gear drive housings. Housings enclose helical gears with a double sealed ball bearing with upper and lower seals for or additional protection. Gears are grease lubricated for life. Mixer mounts with a heavy duty brass clamp with hand wheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum shaft angle. The Model G mixer is a gear drive, electric motor.
Unit of Measure

Specifications

Horsepower Range

 N/A 1/4 to 5

Impeller Speed

 N/A 230 rpm290 rpm350 rpm420 rpm

Mountings

 N/A Clamps Cup Base

Motor Type

 N/A NEMA C

Options

 N/A All Stainless Steel Mixers Coated Shaft and Impellers Sanitary Finishes Shaft and Impellers in other Alloys Stainless Steel Motors USDA Accepted Models

Impeller Selection

N/A

  • FloMor™ High Efficiency Hydrofoils, Three, Four and Wide Blade Designs
  • Square and Hi-Pitch Propellers
  • Pitched Blade Turbines, Three and Four Blade Designs
  • ShearMor™ Disperser Disks, Hi-Flow and Hi-Shear
  • Folding and Custom Impellers